Here are photos from the Lidar Conference held in Denver, CO last month. Click on the photo to expand:
It’s time for the annual Edison Tech Center Pi Day Quiz. Submit your answers by private message on Facebook.
1) An electric quartz crystal clock circuit is
designed. Will the clock maintain the correct
time better if it is a 24 hour clock or a 12 hour
2) The water supply to the Edison Tech Center
starts as a three inch diameter pipe, which is
then connected to a two and one half inch
diameter pipe, which is then connected to a one
inch diameter pipe. Given a constant water
pressure outside the building and ignoring
water friction, what is the speed of the water
inside the different pipes?
3) The Edison Tech Center milling machine
surface can be moved by turning a four inch
diameter handle. One rotation of the handle
moves the machine surface 60/1000 of an inch.
4) An automobile tire decreases in diameter due
to friction on the road. What percentage
odometer error does a 2 mm decrease in
diameter cause on a 381 mm diameter tire?
5) Water friction decreases as pipe diameter
increases. How much water friction is there in
the one inch diameter pipe compared to the
three inch diameter water pipe?
6) An alcohol stove is made out of a cat food can
with a circumference of 20.32 cm. 5 mm holes
are made around the circumference of the can,
spaced 15 mm apart, center to center. How
many holes can be put in the can?
7) A shower has a constant water pressure
supplied. What is the difference in output for a
showerhead with 1 mm holes versus 2 mm
8) Let us model the Mohawk River as a pipe.
When ice builds up on the river, it decreases
the diameter of the pipe. If there is a constant
supply of water in the river, and the ice blocks
half of the diameter of the river, how much does
that change the flow of the river?